SMT ESD Magazine Rack

SMT magazine rack is designed for the manufacture, assebly, storage and transfer PCB.

Screw and Gear Adjustment

Common type (60*C) and heat-resistant type (120*C, 160-200*C) are available.

Surface resistence 10e4-10e6 Ohm

Base: Conductive Plastic or stainless metal

SMT magazine rack is designed for the manufacture, assebly, storage and transfer PCB.

Screw and Gear Adjustment

Common type (60*C) and heat-resistant type (120*C, 160-200*C) are available.

Surface resistence 10e4-10e6 Ohm

Base: Conductive Plastic or stainless metal

SMT magazine rack is designed for the manufacture, assebly, storage and transfer PCB.

Screw and Gear Adjustment

Common type (60*C) and heat-resistant type (120*C, 160-200*C) are available.

Surface resistence 10e4-10e6 Ohm

Base: Conductive Plastic or stainless metal

ES 11101 Anti-static cotton overcoat

Ground static control garment system

Allows operatos and smock to be bonded or electrically connected to ground to prevent ESD event in ESD protected Areas. 2% conductive carbon fiber woven in chain-link design.

Provides continuos and consistent charge dissipation throughout lifetime of smock.

Shields ESD Charges from operators' clothing from damaging ESD sensitive devices.

Prevents insolated charged conductor in ESD Protected area

ES11304 ESD T-shirt & Polo Shirt

Provides continuos and consistent charge dissipation throughout lifetime of smock.

Shields ESD Charges from operators' clothing from damaging ESD sensitive devices.

Prevents insolated charged conductor in ESD Protected area

ESD Rubber Mat

 Anti-static table mat is mainly made of anti-static material and synthetic rubber. The surface layer is a 0.5mm thick static-dissipative layer. The bottom layer is a 1.5mm black conductive layer. Generally, 2mm thick double-layer structure is used. The available colors include green, gray, blue, black and etc. Anti-staitc mat is designed to harmlessly drain charges from presonnel, esd boxes, components and etc. It is lie flat-will not cart and not affected by humidity and superior resistance to abrasion, chemicals and heart resistant, easy to clean and maintain. ESD rubber mat or conductive ground mats should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits and etc, to eliminate damages caused by static electricity. 

Anti-static mat or conductive ground mats should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc. To eliminate damages caused by static electricity. When Anti-staic mat (ground mats) are laid out and grounded the working surface will discharge the static electricity of human bodies so that a near-equipotential can be maintained for ESEDS tweezers, tools, utensils and instruments, through which human bodies contact the working table and static sensitive devices(SSD) are free from broadband interference produced by static discharging such as triboelectrification etc. In this way, electrostatic protection is realized.

Anti-static mat are mainly made of anti-static(conductive) and static-dissipative materials, synthetic rubber, and conductive fabric. The surface layer is a 0.5mm thick static-dissipative layer. The bottom layer is a 1.5mm conductive layer covered with conductive fabric for function strengthening. Generally,2mm thick double-layer structure is used 

  ES14106 esd curtain

Anti-static PVC curtain can be utilized as a barrier wall or protective curtain material in the

ESD sensitive environment;Made of anti-static PVC curtain, continuous honeycomb black carbon lines are printed on one side of PVC sheet, 0.5mm thickness PVC curtain has good draping ability so that it can be used as protective cover or instruments where electro-static should be controlled;Carbon lines are printed on anti-static PVC curtain; Excellent draping ability.

ESD Brush

 ESD Brush made in Electrostatic Discharge (ESD) protective materials protect contents from static electricity and  electrostatic damage.These materials are designed to absorb the charge and pass it to the ground , saving you  thousands of dollars by reducing or eliminating product damage. It conforms to ANSI/ESD S20.20*1999  requirement.This standard requires conductive materials surface resistance to be <1.0 x 10^4 ohms and dissipative  materials to be >1.0 x 104 ohms to <1.0 x 10^9 ohms when tested per EOS/ESD S11.11. The materials also conform to  the static decay requirement of FTM-101B, Method 4046.1 dissipating a 5000 Volt charge to 0 when grounded in less  than 2 seconds.  ESD Brush handle--- polypropylene material   Bristle---Nylon  

ES16101 Antistatic wrist strap

 This wrist band & cord set features a 360 degree conductive contact around the wrist, providing maximum skin contact. The polyurethane coil insulation offers excellent coil memory. Soft blue woven fabric allows the skin to breathe & is comfortable to wear. Uses hypoallergenic silver-plated nylon thread for conductivity & has a maximum resistance of 160 ohms 

ES34801 Plastic Tweezer 

Plastic, Contain Carbon

Dust Free

Antistatic

Resistant to Chemical Solvent

ES22101 Cleanroom Wiper

100% Polyester double knit

Dust Free

Resistant to Chemical Solvent

ES22102 Cleanroom Microfiber Wiper

Super power for wipping up dust

Very soft and harmiess on surface

High Absortion of water

ES19204 KAPTON TAPE

Tape is a polyimide film-backed silicone adhesive tape with extremely low electrostatic discharge properties. Antistatic properties is in back adhesive side. It has high dielectric strength. Polyimide masking tape, offers excellent performance in electrical and thermal insulation.Release surface in fabrication of parts cured at elevated temperatures. Conventional polyimide tape typically generate over 10,000volts during use which can damage around electronic components . The low static properties can eliminate circuit board degradation. Widely used for electronical insulation on transformer, coils ,motor, PCB masking and so on.

ES19101 ESD SHIELDING BAG

 ESD Shielding bags can utmostly protect sensitive components from potential static damage. Their special 4 layers structure forms an induction hood effect to isolate the inside items from electrostatic field. Besides, the inner layer is made of static eliminable polyethylene, this hot seal bag is transparent, the items inside can be clearly recognized from outside. Size and printing are customize. Mainly for packaging of various PCB, electronic components modem, CD-ROM, etc.